Michaela Reay

michaelareay

Company


Bio


User Tags
No tags selected yet.

More items from michaelareay


Long Distance Weld Purge Monitoring

Often when welding lengths of tubes and pipework fabrications of 20 metres or more, measuring the purge gas might not always easy. Under these conditions, there is a risk of contamination of the gas exiting the weld zone, leaving the welders uncertain about their welds and welding procedure.  Weld ...

Michaela Reay


Posted 22 hours agoPress > purgeyeweld purgingweld purge monitor +1

Pipe Freezing with Qwik-Freezer™

Repairs or modifications on pipes can pose challenges, especially where there is liquid present inside, which may result in the expense and danger of system down time and loss of revenue while the system is drained and refilled. To dramatically reduce these costs and speed up the repair or replace ...

Michaela Reay


Posted 29 days agoPress > pipe freezinghuntingdon fusionweld purging +2

Welding Titanium with the Low Cost ‘Nano’

Metals that are classed as ‘reactive' (titanium, zirconium and nickel alloys) are sensitive to oxygen when heated. When welding these metals, the oxygen must be purged from the welding zone, down to as low as 10 parts per million (ppm). Weld Purging in this environment will avoid discolouration of ...

Michaela Reay


Posted 1 month agoPress > huntingdon fusionpurgeyeweld purging +1

Large Diameter Pipework Fabrications

Large diameter pipework can cause several challenges, especially when those pipes are manufactured from stainless, duplex and chrome steels, titanium or zirconium. When welding such reactive materials, they need to be purged of oxygen before, during and after welding. It is not cost effective to c ...

Michaela Reay


Posted 1 month agoPress > quickpurgehuntingdon fusionweld purging +2

Supplementary Gas Shielding with an Argweld® Weld Trailing Shield

Eliminating oxidation and discolouration when welding stainless and duplex steels as well as titanium, zirconium and nickel alloys is crucial in many industries today, because of improving quality control procedures. Welds have to be free from metallurgical defects otherwise they can potentially be ...

Michaela Reay


Posted 1 month agoPress > trailing shieldweld trailing shieldinert gas welding +3
All posts from michaelareay