weld purge monitor


All posts for weld purge monitor

Reliable Oxygen Monitor for Titanium Welding in Aerospace Applications

Prior to welding of titanium, widely practiced in the aerospace Industry, the oxygen content of the purge gas must be reduced to a level below 50 ppm. Engine components such as discs, blades, shafts and casings, from the front fan to the rear of the engine, and fasteners, airframe components and l ...

Michaela Reay


Posted 18 days agoPress > purgeyeweld purge monitorweld purging +2

Low Cost Monitor for Welding Titanium and Stainless Steel

Titanium and stainless steel are both reactive alloys. When they are heated during the welding process, they will react with any air that is present, causing oxidation, which can lead to a loss of corrosion resistance properties. Shielding the metal with an inert gas is therefore crucial and one wa ...

Michaela Reay


Posted 5 months agoPress > purgeye nanoweld purgingweld purge monitor +2

Pipe Purging Monitor

What is Weld Purging? Weld Purging is the displacement of oxygen by an inert gas (usually argon) from the vicinity of a weld, before, during and after welding. It is crucial to displace the oxygen when welding many metals to help achieve oxide free, zero colour welds with no loss of corrosion resis ...

Michaela Reay


Posted 5 months agoPress > purgeye 200pipe purgingweld purge monitor +2

Distance Weld Purge Monitoring

GTA/TIG welding long pipelines made of stainless steel can be found in many different industries including Oil and Gas, Nuclear and LNG. The use of stainless steel can offer many advantages including corrosion resistant properties and cost-effectiveness of the alloy. With Stainless Steel being a r ...

Michaela Reay


Posted 8 months agoPress > huntingdon fusionpurgeyeweld purging +3

Monitor your Titanium Welds for High Quality Results

Preventing oxidation when welding tubes and pipes can be achieved by purging the inside with an inert gas. This simple procedure saves both time and cost. By knowing the exact level of oxygen inside the pipe at all times, the welder knows when to start welding for high quality results. With restri ...

Michaela Reay


Posted 10 months agoPress > purgeyehuntingdon fusionHFT +1

Pipe Purging accurately down to 10 ppm

Measuring the oxygen level during Pipe Purging is crucial. Stainless steel has to be monitored down to at least 100 ppm, however alloys such as titanium and zirconium may need to be monitored down to as low as 10 ppm. Pipe Purging Experts Huntingdon Fusion Techniques HFT®'s PurgEye® 200 Weld Purge ...

Michaela Reay


Posted 11 months agoPress > purgeye 200weld purgingweld purge monitor +1

Monitor Your Weld Purge at a Distance

When welding long pipelines, one problem operators often face is not receiving a fast and true weld purge reading from the weld zone. Huntingdon Fusion Techniques HFT® make it possible to have an immediate reading of the weld purge gas from any distance up to 1,000 metres away with the PurgEye® 10 ...

Michaela Reay


Posted 1 year agoPress > huntingdon fusionpurgeyeweld purge monitor

Oxygen Monitor for Welding

Inert gas welding requires the elimination of oxygen from the weld zone during the welding of reactive metals including stainless steel. Before the welding process begins, the oxygen level must be reduced to a required minimum, which is less than 100 ppm when welding stainless steel.  The low cos ...

Michaela Reay


Posted 1 year agoPress > weld purge monitorhuntingdon fusionppm trace +1

Weld Purge Monitor for On-Site Conditions

Welding on site can pose difficult challenges, including exposure to extremes of heat and cold, harmful sand and dust and even hazardous fumes. Contamination during welding can lead to loss of corrosion resistance and a reduction in strength so control of oxygen levels is crucial.  With another in ...

Michaela Reay


Posted 1 year agoPress > weld purgingweld purge monitoroxygen reader +1

Low Cost Weld Purge Monitor for Welding Titanium

Weld Purging Techniques are now used in most industries especially when welding reactive metals. Whilst the welding torch provides a protective cover to the top of the fusion zone, inert gas coverage is also required at the weld root.  By sampling the gas and testing the oxygen content around the ...

Michaela Reay


Posted 1 year agoPress > purgeye nanoweld purgingback purging +3

Portable 10 ppm Weld Purge Monitor

With ever-improving standards in Quality Control, measuring the oxygen level around welds before, during and after welding reactive metals is crucial.  The hand held PurgEye® 200 is a Weld Purging Monitor® specifically developed and designed for use when welding titanium, zirconium, high specifica ...

Michaela Reay


Posted 1 year agoPress > weld purgingweld purge monitorpurgeye +2

Zero Colour Titanium Welds with the PurgEye® Desk

Titanium is the metal of choice in a variety of industries due to its excellent corrosion resistance to acids, chlorides and salt. Titanium has a wide continuous service temperature range, from liquid nitrogen (-322°F) to 1,100°F and the highest strength-to-weight ratio of any metal. Titanium is a ...

Michaela Reay


Posted 1 year agoPress > purgeyepurgeye deskhuntingdon fusion +2

New: Unique 10 ppm Colour Touch Screen Weld Purge Monitor®

It is essential to monitor the oxygen level when welding reactive metals. Metals that are classed as ‘reactive' (titanium, zirconium and nickel alloys) are sensitive to oxygen when heated. When welding these metals, the oxygen must be purged from the welding zone, down to as low as 10 parts per mil ...

Michaela Reay


Posted 1 year agoPress > purgeyeweld purge monitorweld purging +2

Long Distance Weld Purge Monitoring

Often when welding lengths of tubes and pipework fabrications of 20 metres or more, measuring the purge gas might not always easy. Under these conditions, there is a risk of contamination of the gas exiting the weld zone, leaving the welders uncertain about their welds and welding procedure.  Weld ...

Michaela Reay


Posted 1 year agoPress > purgeyeweld purgingweld purge monitor +1

Welding Titanium with the Low Cost ‘Nano’

Metals that are classed as ‘reactive' (titanium, zirconium and nickel alloys) are sensitive to oxygen when heated. When welding these metals, the oxygen must be purged from the welding zone, down to as low as 10 parts per million (ppm). Weld Purging in this environment will avoid discolouration of ...

Michaela Reay


Posted 1 year agoPress > huntingdon fusionpurgeyeweld purging +1