Press

Low Cost 1 PPM Weld Purge Monitor®

Posted by Michaela Reay

17-Oct-2017

huntingdonfusion.com


For many years, oxygen monitors and gas analysers have been used for weld purging. These instruments have been designed and calibrated for accuracy at atmospheric oxygen level, but not for weld purging where accuracy is required when reading much lower oxygen levels.

With their scientific background, Huntingdon Fusion Techniques HFT® have designed and manufactured the PurgEye® 300 Nano, the World's first and only low cost, no frills, Weld Purge Monitor® that measures accurately down to 10 parts per million (ppm) on a large alpha numeric display.

Ron Sewell, Chairman for HFT® said: “The PurgEye® 300 Nano has been developed for weld purging where data logging, alarms and welder control are not necessarily required. It is small, lightweight and inexpensive. There are no knobs, no switches, no controls, making this a really simple, ‘plug and play' monitor.”

“A unique long life sensor is used, that has the capacity to measure oxygen down to 1 ppm with very high accuracy down to 10 ppm. The Nano avoids the disadvantages of monitors with ‘wet cell' technology that have to be regularly calibrated and have sensors replaced.”

With its ‘leak tight' connectors for weld purge hoses, the PurgEye® 300 Nano can be used with free flow from the exhaust of a purging system, or with an optional accessory hand pump and gas sampling probe that can take readings via a joint gap.

The monitor can equally be used to check purge gas quality from the main source as well as from the exhaust end of a purging system and to find air leaks in purging hose connections anywhere in a system.

Due to the constant upward trends in Quality Control procedures, there is growing pressure on certain Industries to carry out their welding in the absence of oxygen to an ever increasingly lower level. Metals such as stainless steel, titanium, zirconium and nickel alloys are now available to these industries to ensure the greatest strengths, the highest resistance to corrosion and of course the lowest failure rates.

These metals are commonly welded with the GTAW (TIG) process that needs the arc and its surrounding zone to be shielded with a high specification inert gas that has the minimum amount of oxygen. If the welds and their adjacent metal become oxidised, which leads to a lower resistance to corrosion and that has to be prevented.

For this purpose, Weld Purge Monitors® were invented in the 1970's to measure the oxygen levels for welding by World Leading Weld Purging Experts Huntingdon Fusion Techniques HFT®. At the time, 100 parts per million of oxygen in argon was deemed to be a good level for most stainless steel and other metals, however research shows that it has become necessary these days to try to attain a purity approaching 1 ppm of oxygen in argon when shielding the welds zones in front and behind.

HFT® has a Family Range of PurgEye® Weld Purge Monitors® for every application. The range includes hand held, battery operated monitors and mains powered monitors, which can read oxygen levels from atmospheric concentrate, right down to 1 ppm.

Ron continues: “All of Huntingdon Fusion Techniques HFT®'s Weld Purge Monitors® and Inflatable Tube, Pipe and Pipeline Weld Purging Systems are manufactured in the UK. We do not sacrifice on quality. We guarantee to help you achieve zero colour welds, time and time again.”

Huntingdon Fusion Techniques HFT® have a worldwide Exclusive Distributor network which can be found at www.huntingdonfusion.com.


Visit source site

huntingdonfusion.com

weld purgingweld purge monitorback purginghuntingdon fusion

More items from michaelareay


Improve Tungsten Electrode and Welding Arc Performance with the TEG-1000

Tungsten Electrode Grinders are essential with TIG/GTA welding. Using a Grinder that has been designed and manufactured specifically for tungsten metal is not only a much safer option, they provide more accurate results leading to as many as ten times greater number of arc strikes and giving very d ...

Michaela Reay


Posted 1 day agoPress > tig weldingteg1000thoriated tungsten electrodes +3

Weld Purging Post Weld Heat Treated (PWHT) Pipework

Welding processes can weaken metals by imparting residual stresses into a material, leading to a reduction in corrosion resistance properties. Post Weld Heat Treatment (PWHT) is regularly used to retain the strength of a metal when welding certain materials including high strength stainless steel a ...

Michaela Reay


Posted 9 days agoPress > weld purgingpwht pipeworkhotpurge +1

Weld Purging: Replace Paper, Foam and other unsuitable Materials with Argweld® Weld Purge Dams

Weld Purging is essential when welding tubes and pipes made of reactive metals such as stainless steels, titanium and zirconium. Usually weld zones are confined with purge dams so that the use of argon purge gas is limited and waiting times are reduced. Homemade dams fabricated from paper, sponge ...

Michaela Reay


Posted 16 days agoPress > huntingdonhuntingdon fusionHFT +2

Oxidation Free Weld Beads with Weld Backing Tape™

Welders are often faced with challenges where high quality stainless steel, duplex and chrome steel welds are required, but where the use of purge gas is not always possible. One solution to this problem is the use of Argweld® Weld Backing Tape™ from Huntingdon Fusion Techniques HFT®. This high te ...

Michaela Reay


Posted 22 days agoPress > huntingdon fusionweld backing tapebacking tape +2

Fast, Reliable and Safe Stopping of Pipe Contents with Inflatable Rubber Plugs

Sealing, stopping and blocking pipes where oils, hydrocarbons and petrochemicals are present can cause major inconveniences with many normal stoppers not being able to handle such conditions. The Pipestoppers® Division at Huntingdon Fusion Techniques HFT® manufactures a Range of Inflatable Rubber ...

Michaela Reay


Posted 28 days agoPress > pipe stoppersinflatable pipe plugspipe blocking +1
All posts from michaelareay