Press

Handy Purge Monitor, now with PurgeNet™

Posted by Michaela Reay

19-Sep-2017

huntingdonfusion.com


To remain at the forefront of Weld Purging technology, World leading Weld Purging Experts and inventors of the Weld Purge Monitor®, Huntingdon Fusion Techniques HFT® have launched the updated hand-held PurgEye® 200 Weld Purge Monitor®, now with PurgeNet™.

When welding metals such as stainless steel and titanium, it is essential to measure the oxygen level before, during and after welding using a Weld Purge Monitor®.

Georgia Gascoyne, CEO for HFT® said: “PurgeNet™ allows networking to a range of accessories. Typically, one accessory allows direct interface to an Orbital Welder or any other automatic welding machine, so that the oxygen level in the vicinity of the weld can be monitored and the welding machine can be switched on or off according to pre-set oxygen levels. A second accessory is a warning lamp that can signal when oxygen levels are low and high according to pre-set levels.”

The revolutionary portable PurgEye® 200 is now manufactured with a new OLED (organic light emitting diode) display, which will give brighter, clearer and sharper readings for viewing at greater distances than before and at wider angles. These OLED displays are mainly symbol based rather than text based, making the menus internationally comprehensible.

The PurgEye® 200 operates either on batteries or mains power. Charging can also be carried out from a dock (optional) and battery life is much longer than its predecessor. Along with louder, pre-settable audio alarms for rising or falling oxygen levels, the PurgEye® 200 comes complete with a faster response long life sensor.

This updated model has an integral electro-mechanical pump so that it can be used to extract samples from a weld purge zone, in the event that there is insufficient flow rate or positive pressure to activate the sensor correctly.

The PurgEye® 200 Weld Purge Monitor® reads down to 1 ppm (very accurate to 10 ppm) for the accuracy that other oxygen measuring instruments don't give. The Monitor is IP65 rated, which means it can be used in very demanding areas where instruments are used on site, such as in desert or tropical conditions. PurgeLog™ software also gives Weld Purging results to give quality control documents for each weld. The monitor also has the capability to switch between percentage oxygen and parts per million shown on the display.

Huntingdon Fusion Techniques HFT® have a Worldwide Exclusive Distributor network, which can be found at www.huntingdonfusion.com.



New service from OilVoice
Trip Shepherd is for companies who need to track their staff in areas of risk.
It's free to use, so we invite you to try it.

Visit source site

huntingdonfusion.com

weld purgingweld purge monitoroxygen readergas analyzerhuntingdon fusion

More items from michaelareay


Reliable Oxygen Monitor for Titanium Welding in Aerospace Applications

Prior to welding of titanium, widely practiced in the aerospace Industry, the oxygen content of the purge gas must be reduced to a level below 50 ppm. Engine components such as discs, blades, shafts and casings, from the front fan to the rear of the engine, and fasteners, airframe components and l ...

Michaela Reay


Posted 1 month agoPress > purgeyeweld purge monitorweld purging +2

Easy Valve Replacement with CO2 Pipe Freezing

The Pipestoppers® Division at Huntingdon Fusion Techniques HFT® provides a cost saving solution to carrying out repairs or modifications on pipes with liquid inside, which also includes valve replacement. Replacing valves in pipework can be a challenge, especially when the pipelines have liquids r ...

Michaela Reay


Posted 2 months agoPress > qwik freezeraccu freezepipe freezing +1

Heavy-Duty Pipe Stopping with Steel Plugs

Heavy-duty leak testing, sealing, pipe blocking and stopping is easy with Steel Plugs from the Pipestoppers®. Steel Test Plugs can be used for low pressure testing and plugging pipes, pipelines and pipework fabrications and other orifices between 2 and 48” (50 to 1,200 mm) diameter. Luke Keane, T ...

Michaela Reay


Posted 2 months agoPress > pipe stoppingpipe blockingsteel plugs +1

Perfectly Ground Tungsten Electrodes

When it comes to TIG welding, Tungsten Electrodes are the most important part of the application. A properly ground Tungsten Electrode will help to improve arc starting and stability, giving an overall better performance. Huntingdon Fusion Techniques HFT® manufactured the TEG-1000 Tungsten Electro ...

Michaela Reay


Posted 2 months agoPress > huntingdon fusionteg-1000tungsten electrode grinder +1

Weld Purging with Preheat

In the power generation and nuclear industry, low and medium alloy steels such as SA 213 T91 and SA 335 P91 are chosen for their high strength, but are often prone to cracking during welding. Pre-heating and post-heating reduces the crack sensitivity. In order to meet the requirements of inert gas ...

Michaela Reay


Posted 3 months agoPress > hotpurgewelding with preheatwelding p91 +1
All posts from michaelareay