Press

Keeping Tube and Pipe Joints Clean when Welding

Posted by Michaela Reay

13-Sep-2017

huntingdonfusion.com


It is important when welding stainless steel and titanium tube and pipe joints to be able to have zero colour, oxide-free welds both on the inside and outside.

To achieve the conditions for zero colour, or oxide-free weld joints, it is necessary to remove the air around the joint to a level where the oxygen percentage is somewhere between 5 and 50 parts per million, subject to the metal and, to some extent, the application.

Removing the air from the vicinity of the weld inside and outside has to be carried out simultaneously and this is best carried out on the outside with an accessory called a Weld Trailing Shield® and on the inside with an Inflatable Pipe Purging System.

A short video showing a Trailing Shield® attached to a TIG/GTAW welding torch can be seen here https://youtu.be/9XlXBuY01iU and you will notice how super clean the outside of the weld is.

A short video showing the set up and purging of a pipe can be seen at https://youtu.be/Q-dSRpPvd1s.

The Trailing Shields® are light in weight and are carried easily by the welder as the torch is moved around the seam. As the sides are fused together, the hot metal is shielded for a very short time by the inert argon gas flowing through the welding torch and out of the ceramic gas cup. At this time, the Trailing Shield® that has also been connected to an argon supply takes over and shields the hot metal until its temperature falls below its oxidation level, thus leaving a perfectly clean weld.

In the meantime, inside the pipe, two inflatable dams tightly seal a cavity about 10” (250 mm) either side of the joint.

An argon gas supply pushes the air out and it exits through a Weld Purge Monitor® which indicates when the air has achieved an oxygen level below 50 ppm, or any other level as required by the WPS (welding procedure sheet). At that time, the welder begins his process.

Without such accessories, welding in performed in an oxidised environment, leading to loss of corrosion resistance and results in metallurgical imperfections in the joint.

Oxidised welds incur a penalty for the company, as they have to ensure that the oxidation and discolouration are totally removed by mechanical or chemical means.  Such additional work can have an effect on profitability and on delivery time.


Visit source site

huntingdonfusion.com

weld purgingweld trailing shieldstube and pipe purging systempipe purgingwelding stainless steel

More items from michaelareay


Low Cost 1 PPM Weld Purge Monitor®

For many years, oxygen monitors and gas analysers have been used for weld purging. These instruments have been designed and calibrated for accuracy at atmospheric oxygen level, but not for weld purging where accuracy is required when reading much lower oxygen levels. With their scientific backgroun ...

Michaela Reay


Posted 3 days agoPress > weld purgingweld purge monitorback purging +1

Double Freezing Technique for Large Diameter Valve Replacement

Replacing valves in a pipeline can be a challenge, especially when the pipelines have liquids running through them. One option is to completely drain the system to make the repairs, which can prove costly with respect to loss of expensive fluid, heating or cooling costs, security matters, time that ...

Michaela Reay


Posted 10 days agoPress > qwik freezerpipe freezing

Inflatable Stoppers for Petrochemical Applications

Blocking pipes or other orifices to carry out routine maintenance and other applications can prove challenging where hydrocarbons are present in liquid and gas form. Now, a range of hydrocarbon resistant Inflatable Pipestoppers is available for the Petrochemical and Oil and Gas Industries. Manufac ...

Michaela Reay


Posted 16 days agoPress > pipe stoppingpipe pluginflatable pipe stoppers +2

Highest Quality Welds made with Lower Costs

Welding stainless steel, titanium, zirconium, niobium and other metals sensitive to atmospheric gases, requires oxygen levels to be as low as 10 ppm and in some cases, knowledge of dew point level in the shielding and purging gas. Many welds of this nature are still welded with archaic or home-made ...

Michaela Reay


Posted 24 days agoPress > weld purgingoxygen readerweld purge monitor

Handy Purge Monitor, now with PurgeNet™

To remain at the forefront of Weld Purging technology, World leading Weld Purging Experts and inventors of the Weld Purge Monitor®, Huntingdon Fusion Techniques HFT® have launched the updated hand-held PurgEye® 200 Weld Purge Monitor®, now with PurgeNet™. When welding metals such as stainless stee ...

Michaela Reay


Posted 1 month agoPress > weld purgingweld purge monitoroxygen reader +2
All posts from michaelareay