Press

Low Cost one-way Valve for specific flow rate and pressure

Posted by Michaela Reay

05-Sep-2017

huntingdonfusion.com


This low cost accessory has been designed and constructed to pass a maximum of 7.5 litres/min and 0.5 bar pressure.

Other versions of 1bar and above are also available.

Designated “PurgeGate®”, this nifty, hi-tech item has applications in both fluid and gas control. Its small size and low weight makes it valuable for small liquid dispensing machines, as well as large ones with multiple heads, where higher pressures and flow rates might be used to cater for the output of a multi-head machine.

PurgeGate® has found valuable applications in the Welding Industry, where inflatable devices are used for Weld Purging of tubes and pipes.

Setting flow rates and pressures on gas regulators can be interfered with by personnel distant to the welding process, who might move the controls or play with them, without realising the harm that can be done.

If inflatable devices are caused to burst during a tube or pipe weld sequence, then the loss of protective gas can cause a highly expensive and extremely inconvenient repair.

For more information contact:
michaelareay@huntingdonfusion.com
www.huntingdonfusion.com 


Visit source site

huntingdonfusion.com

purgegateinflatable pipe purgingpipe purgingweld purginghuntingdon fusion techniques

More items from michaelareay


Portable 10 ppm Weld Purge Monitor

With ever-improving standards in Quality Control, measuring the oxygen level around welds before, during and after welding reactive metals is crucial.  The hand held PurgEye® 200 is a Weld Purging Monitor® specifically developed and designed for use when welding titanium, zirconium, high specifica ...

Michaela Reay


Posted 8 days agoPress > weld purgingweld purge monitorpurgeye +2

Weld Purging: Replace Foam with Film for High Quality Welds

The use of home made sponge foam purge dams for pipe weld purging is still very familiar throughout the welding industry. However, operators are unaware as to how the use of sponge foam can adversely influence the metallurgical strength of a joint. When sponge foam starts to warm up from the heat ...

Michaela Reay


Posted 15 days agoPress > weld purgingweld purge filmhuntingdon +3

Zero Colour Titanium Welds with the PurgEye® Desk

Titanium is the metal of choice in a variety of industries due to its excellent corrosion resistance to acids, chlorides and salt. Titanium has a wide continuous service temperature range, from liquid nitrogen (-322°F) to 1,100°F and the highest strength-to-weight ratio of any metal. Titanium is a ...

Michaela Reay


Posted 22 days agoPress > purgeyepurgeye deskhuntingdon fusion +2

No Draining the Pipe System with Pipe Freezing

Eliminating the need to drain long sections of pipe for repairs or modifications and reducing shut down time is now possible with Pipe Freezing Systems. The Pipestoppers® Division at Huntingdon Fusion Techniques HFT® provides a cost saving solution with Qwik-Freezer™, the industry standard portabl ...

Michaela Reay


Posted 28 days agoPress > pipe freezingqwik freezeraccu freeze +2

New: Unique 10 ppm Colour Touch Screen Weld Purge Monitor®

It is essential to monitor the oxygen level when welding reactive metals. Metals that are classed as ‘reactive' (titanium, zirconium and nickel alloys) are sensitive to oxygen when heated. When welding these metals, the oxygen must be purged from the welding zone, down to as low as 10 parts per mil ...

Michaela Reay


Posted 1 month agoPress > purgeyeweld purge monitorweld purging +2
All posts from michaelareay