What Kind Of Alloy Is Incoloy800 (N08800)? Can It Be Used In Oil and Gas Industry?

So what is Incoloy800?

Incoloy800 is an alloy with Cr content usually 15-25%, nickel content 30-45%, and a small amount of aluminum and titanium.

Incoloy800 UNS N08800 Tubings

The Cr content in incoloy800 alloy is usually 15-25%, nickel content is 30-45%, and contains a small amount of aluminum and titanium.

The 800 alloy is in the austenite single zone after high temperature and rapid cooling, so the use state is a single austenite structure. The alloy has a high chromium content and a sufficient nickel content, so it has a high resistance to high temperature corrosion, and is widely used in industry.

It has excellent resistance to stress corrosion cracking in chloride, low-concentration NaOH aqueous solution and high-temperature and high-pressure water.

Mechanical properties and physical properties of Incoloy800

The mechanical properties are shown in the table below:


σb / MPa

σ0.21 / MPa

δ5 / %


Application temperature range

  • N08800: ≤600 ℃,
  • N08810: 600-950℃,
  • N08811: 700-1000℃.

N08800, UNS N08800 alloy is a nickel-iron-chromium-iron nickel-based corrosion-resistant and heat-resistant alloy, with high strength, oxidation resistance, corrosion resistance, oxidation resistance, carbonization, nitriding, and good creep strength.

The product has excellent mechanical properties at sub-zero, room temperature and high temperature as high as RR℃.

Corrosion resistance

Incoloy800 is a face-centered cubic lattice structure strengthened by austenite solid solution.

Incoloy800 is resistant to corrosion by many corrosive media, and its corrosion resistance is equivalent to that of austenitic stainless steel in a water-based corrosive environment.

The high nickel content makes it resistant to stress corrosion cracking, and the high chromium content makes it better resistant to pitting and crevice corrosion.

Incoloy800 alloy has good corrosion resistance to nitric acid and organic acids, but its corrosion resistance in sulfuric acid and hydrochloric acid is limited.

In addition to the possibility of pitting corrosion in halides, it has good corrosion resistance in oxidizing and non-oxidizing salts. It also has good corrosion resistance in water, steam and mixtures of steam, air and carbon dioxide. It has excellent anti-oxidation, carbonization atmosphere and environmental performance in which oxidation and carbonization alternately occur at high temperatures. The corrosion resistance of hydrogen, nitrogen and sulfur-containing gases is also very good. In the latter application environment, the performance is better in oxidizing conditions than in reducing conditions.

In summary, the alloy has excellent oxidation and corrosion resistance.

Posted by KAYSUNS, the stainless steel pipe fittings supplier

New service from OilVoice
Trip Shepherd is for companies who need to track their staff in areas of risk.
It's free to use, so we invite you to try it.

Visit source site

AlloyIncoloy800UNS N08800

More items from cnwellgreen

Duplex Stainless Steel Pipe Used In The Cooling Water System Of Nuclear Power

Duplex Stainless Steel Pipe for Nuclear Power Cooling Water System As a clean energy, nuclear power is a major contributor to global carbon emissions reduction, and it can play a greater role in the future. Duplex stainless steel pipe for cooling water system is the future. The key fac ...

roger chen - kaysuns industry limited

Posted 6 days agoPress > duplex stainless steel pipeCooling Water SystemNuclear Power

The Short-term Supply Of 316L Stainless Steel Seamless Pipes In The Chinese Market Will Maintain A Slight Downward Trend

This week, the domestic TP316L stainless steel seamless pipe prices showed an overall upward trend, and the raw material end declined Affected by heavy rains in many southern provinces this week, river water levels have skyrocketed, and supply of 316L stainless steel seamless pipes have rebounde ...

roger chen - kaysuns industry limited

Posted 17 days agoPress > 316L Stainless Steel Seamless PipessupplyChinese Market

Russian Norilsk Nickel Group Has Another Fuel Leak

This Is The Second Fuel Leak In Norilsk Nickel Group This Year The Russian Norilsk Nickel reported that the Norilsktransgaz pipeline belonging to the Norilsk Nickel Group has fuel leak during the aviation fuel transfer near the village of Tukhard on the Gydanskii tundra. The company said i ...

roger chen - kaysuns industry limited

Posted 24 days agoPress > norilskfuelleakRussia +1

What Is Surface Roughness? Is It Necessary In The Petroleum Industry?

Surface roughness is very important for most surfaces involved in sliding contact. This is because factors such as the original rate of wear and sustained nature are highly dependent on this characteristic. These surfaces are generally load-bearing surfaces, and the roughness needs to be marked to ...

roger chen - kaysuns industry limited

Posted 1 month agoPress > Surface Roughness

What Is TP347H? Can It Be Used in Oil Industry?

Introduction of TP347H (1Cr19Ni11Nb) stainless steel pipe As a stainless steel pipe fittings supplier , today kaysuns will share the introduction of what is TP347H (1Cr19Ni11Nb) stainless steel pipes . TP347H (1Cr19Ni11Nb) is a high-carbon niobium-containing Cr-Ni austenitic stai ...

roger chen - kaysuns industry limited

Posted 1 month agoPress > tp347h347 STAINLESS STEEL PIPE
All posts from cnwellgreen