Press

Accurately Measure the Dew Point During Purging

Posted by Michaela Reay

14-May-2020

huntingdonfusion.com


During purging welders need to measure the oxygen content but also need to measure the ‘dew point'.

The dewpoint is the temperature where condensation begins and water will condense on the material being welded. This can affect the weld properties significantly.

Georgia Gascoyne, CEO for HFT® said: “We have recently added a Dew Point Sensor to our range that can be used in conjunction with our range of 10 ppm Weld Purge Monitors®, so rather than purchasing a separate, expensive Dew Point Meter, HFT®'s Dew Point Sensor can be connected to the Weld Purge Monitor® via the PurgeNet™ lead.”

The Dew Point Sensor is designed to fit any of our Weld Purge Monitors® that read down to 1ppm, which includes the PurgEye® 200, PurgEye® Desk, PurgEye® 600, PurgEye® 1000 and the PurgEye® Site.



New service from OilVoice
Trip Shepherd is for companies who need to track their staff in areas of risk.
It's free to use, so we invite you to try it.

Visit source site

huntingdonfusion.com

dew pointweld purginghuntingdon fusionHFT

More items from michaelareay


Reliable Oxygen Monitor for Titanium Welding in Aerospace Applications

Prior to welding of titanium, widely practiced in the aerospace Industry, the oxygen content of the purge gas must be reduced to a level below 50 ppm. Engine components such as discs, blades, shafts and casings, from the front fan to the rear of the engine, and fasteners, airframe components and l ...

Michaela Reay


Posted 19 days agoPress > purgeyeweld purge monitorweld purging +2

Easy Valve Replacement with CO2 Pipe Freezing

The Pipestoppers® Division at Huntingdon Fusion Techniques HFT® provides a cost saving solution to carrying out repairs or modifications on pipes with liquid inside, which also includes valve replacement. Replacing valves in pipework can be a challenge, especially when the pipelines have liquids r ...

Michaela Reay


Posted 25 days agoPress > qwik freezeraccu freezepipe freezing +1

Heavy-Duty Pipe Stopping with Steel Plugs

Heavy-duty leak testing, sealing, pipe blocking and stopping is easy with Steel Plugs from the Pipestoppers®. Steel Test Plugs can be used for low pressure testing and plugging pipes, pipelines and pipework fabrications and other orifices between 2 and 48” (50 to 1,200 mm) diameter. Luke Keane, T ...

Michaela Reay


Posted 1 month agoPress > pipe stoppingpipe blockingsteel plugs +1

Perfectly Ground Tungsten Electrodes

When it comes to TIG welding, Tungsten Electrodes are the most important part of the application. A properly ground Tungsten Electrode will help to improve arc starting and stability, giving an overall better performance. Huntingdon Fusion Techniques HFT® manufactured the TEG-1000 Tungsten Electro ...

Michaela Reay


Posted 1 month agoPress > huntingdon fusionteg-1000tungsten electrode grinder +1

Weld Purging with Preheat

In the power generation and nuclear industry, low and medium alloy steels such as SA 213 T91 and SA 335 P91 are chosen for their high strength, but are often prone to cracking during welding. Pre-heating and post-heating reduces the crack sensitivity. In order to meet the requirements of inert gas ...

Michaela Reay


Posted 1 month agoPress > hotpurgewelding with preheatwelding p91 +1
All posts from michaelareay