Press

High-pressure Boiler Seamless Steel Pipe


High pressure boiler seamless steel tube is a kind of boiler tube, which belongs to the seamless steel tube category. The manufacturing method is the same as the seamless pipe, but there are strict requirements on the steel type used for manufacturing the steel pipe.

High-pressure boiler seamless steel tubes are often under high temperature and pressure when used. The tubes will be oxidized and corroded under the action of high temperature flue gas and water vapor. It is required that the steel pipe has high durability, high resistance to oxidation and corrosion, and good structural stability. High-pressure boiler seamless tubes are mainly used to manufacture superheater tubes, reheater tubes, air ducts, and main steam tubes for high-pressure and ultra-high-pressure boilers.

Low and medium pressure boiler tubes GB3087-2008, seamless steel tubes for high pressure boilers GB5310-1995 are used to manufacture low temperature and high pressure boiler superheated steam pipes, boiling water pipes and locomotive boiler superheated steam pipes, large smoke pipes, small smoke pipes Hot-rolled and cold-drawn (rolled) seamless steel tubes of high-quality carbon structural steel for arch brick pipes. Structural seamless steel tubes (GB / T8162-2008) are seamless steel tubes for general and mechanical structures.

Specifications and appearance quality: GB5310-95 "Seamless Steel Tubes for High Pressure Boilers" The outer diameter of hot-rolled tubes is 22 to 530mm, and the wall thickness ranges from 20 to 70mm. Cold-drawn (cold-rolled) pipe has an outer diameter of 10 to 108 mm and a wall thickness of 2.0 to 13.0 mm.

The special-shaped seamless steel pipe is a general term for seamless steel pipes of other cross-sectional shapes other than round pipes. According to the different shapes and sizes of the steel pipe section, it can be divided into equal-wall thickness shaped seamless steel pipes (code D), unequal-wall thickness shaped seamless steel pipes (code BD), and variable-diameter shaped seamless steel pipes (code BJ). Shaped seamless steel tubes are widely used in various structural parts, tools and mechanical parts. Compared with the round pipe, the special-shaped pipe generally has a larger moment of inertia and a section modulus, and has a greater resistance to bending and torsion, which can greatly reduce the structural weight and save steel.



New service from OilVoice
Trip Shepherd is for companies who need to track their staff in areas of risk.
It's free to use, so we invite you to try it.

Visit source site

https://permanentsteel.com/newsshow/high-pressure-...

Seamless steel pipeHigh-pressure BoilerSeamless Tube

More items from lvy


What is Electric Fusion Welding (EFW) and Electric Resistance Welding (ERW)?

Electric fusion welding  (EFW)is the combination of metal and metal by heating one or several consumable electrodes and the workpiece. Resistance welding is a welding process that uses a strong current to pass through the contact point between the electrode and the workpiece to generate heat from t ...

lvy lee - Permanent Steel Manufacturing Co.,Ltd


Posted 2 hours agoPress > Electric Resistance WeldingERW pipeEFW pipe

Classification and Function of Petroleum Casing Pipe

The oil layer casing is the production casing, and the tail pipe technology is only one kind of cementing technology. It is a method of hanging the casing on the upper casing only by the open hole section of the lower oil casing and the technical casing. For details, please refer to the following kn ...

lvy lee - Permanent Steel Manufacturing Co.,Ltd


Posted 3 hours agoPress > casing pipeclassificationAfrica Oil & Petroleum

Comparison of ERW Welded Pipe and Seamless Steel Pipe (tested by PetroChina Pipe Institute)

1. Outer diameter tolerance ERW steel pipe : It is cold-formed and sizing is completed by reducing the diameter by 0.6%. The process temperature is basically constant at room temperature. Therefore, the outer diameter is controlled accurately and the fluctuation range is small, which is helpful to ...

lvy lee - Permanent Steel Manufacturing Co.,Ltd


Posted 7 days agoPress > ERW Welded PipeSeamless steel pipePetroChina Pipe +1

Processing of High-strength Petroleum Casing Wire Tube Above N80Q Grade

The production method of high-strength petroleum casing (above N80Q grade) is generally completed by steelmaking, rolling, quenching and tempering, and pipe processing. During the production process, the outer diameter of the tube blank is controlled during the processing of the wire. The requiremen ...

lvy lee - Permanent Steel Manufacturing Co.,Ltd


Posted 8 days agoPress > Petroleum CasingN80 casing pipeWire processing

Testing Methods of Oil Casing Manufacturers

What are the detection methods of oil casing pipe ? Let's take a brief look: 1. Ultrasonic testing When ultrasonic waves are spread in the tested raw materials, the acoustic characteristics of the raw materials and the changes in the internal organization have a positive impact on the spread of t ...

lvy lee - Permanent Steel Manufacturing Co.,Ltd


Posted 13 days agoPress > oil casingTesting MethodsManufacturers
All posts from lvy