Press

How to Control the Special Oil Pipe


How to control the special oil pipe? Let us briefly understand:

Valves are mechanical devices used to open, close, and perhaps regulate the flow of media in pipes. There are many types of valves, and there are many types of classification. If it is differentiated by purpose, it can be divided into shut-off valve, check valve, dispatch valve, etc .; if it is divided by pressure, it can be divided into vacuum valve (working pressure is less than the standard atmospheric pressure), low pressure valve (PN≤1.6MPa), medium pressure valve (PN = 2.5—6.4MPa) and high pressure valve (PN = 10—80MPa). According to the driving method, it can be divided into manual valve, power driven valve and automatic valve. The gate valve is equal to the valve base and the valve plate. The valve plate moves vertically up and down with the valve stem through the hand wheel to cut or unblock the pipeline, and at the same time, it can adjust the unblocking ratio of the pipeline. Due to the characteristics of the gate, the gate valve is usually fully opened or closed for adjustment, and it is rarely used for flow adjustment. However, the gate valve has the advantages of good sealing function and easy maintenance. The valve core of the stop valve falls vertically on the base, the valve seat is parallel to the center line of the pipeline, the fluid
flows in an "S" shape in the valve body, and the fluid resistance is large. The stop valve is usually used for flow adjustment, and has simple manufacturing and maintenance It's a little bit, but it leaks easily when closed and is not as tight as a gate valve.

In the laying of long-distance transportation pipelines, valves must be installed along the line, and the distance should not exceed 32km. If the pipeline line passes through areas with rare fireworks, it may be appropriate to relax.

Buried oil pipelines must be equipped with valves at both ends of pipelines that pass through densely populated areas such as large rivers, lakes, reservoirs, and towns, or according to terrain conditions. The location of the cut-off valve should not be affected by geological hazards and floods, and it should meet the requirements of simple traffic and easy inspection, and protection facilities should be set up.

The above is the control method of the special oil pipe, I hope to help you.



New service from OilVoice
Trip Shepherd is for companies who need to track their staff in areas of risk.
It's free to use, so we invite you to try it.

Visit source site

https://permanentsteel.com/

Special Oil Pipecontrolvalves

More items from lvy


The Technological Development Process of ERW Steel Pipe

High frequency straight seam welded pipe (ERW) is the hot rolled coil plate formed by the forming machine, using the skin effect and proximity effect of high frequency current to heat and melt the edge of the tube blank, and pressure welding under the action of the squeeze roller To achieve product ...

lvy lee - Permanent Steel Manufacturing Co.,Ltd


Posted 5 days agoPress > erw steel pipeTechnological Developmentwelded pipe +1

Analysis of Main Causes of Gas Pipeline Leakage

There are many causes of gas pipeline leakage accidents. In an industrial system dominated by diversified mechanisms, management and maintenance and construction quality are the main causes of gas pipeline leakage. Find out the basic causes of the accident and take timely preventive work. It is an ...

lvy lee - Permanent Steel Manufacturing Co.,Ltd


Posted 15 days agoPress > Gas Pipeline LeakageChina Pipe manufacturerOil and Gas

How to Get Out of Trouble for Seamless Steel Pipe Manufacturers

The seamless steel pipe industry has been in a downturn for nearly a year. Faced with this phenomenon, many seamless steel companies are demanding a new way out. So, in the face of this phenomenon, what exactly do companies need to survive in such a market environment and even make a profit? Seam ...

lvy lee - Permanent Steel Manufacturing Co.,Ltd


Posted 1 month agoPress > seamless steel pipe manufacturerBusiness

Causes of Cracking of ERW Welded Pipes and Countermeasures

Thermal cracking refers to the cracks generated at high temperature, also known as high temperature cracks or crystal cracks, which usually occur inside the weld, and sometimes may also appear in the heat affected zone. The manifestations are: longitudinal cracks, transverse cracks, root cracks, cra ...

lvy lee - Permanent Steel Manufacturing Co.,Ltd


Posted 1 month agoPress > ERW Welded PipeChina Pipe manufacturer

Electric Resistance Welded (ERW) Pipe Manufacturing Process

Electric resistance welding ( ERW Pipe ) is used to transport oil, natural gas and other vapor and liquid objects, which can meet various requirements of high and low pressure, and currently occupies a pivotal position in the field of transportation pipes in the world. The electric resistance weld ...

lvy lee - Permanent Steel Manufacturing Co.,Ltd


Posted 1 month agoPress > electric resistance welded pipeERW pipeManufacturing Process
All posts from lvy