Press

Annealing Process of Seamless Steel Pipe


Annealing process of seamless steel pipe:
1. Fully annealed. It is used to refine the coarse and superheated structure with poor mechanical properties in medium and low carbon steels after casting, forging and welding. The workpiece is heated to a temperature between 30 and 50 ° C above the temperature at which ferrite is completely transformed into austenite, and is held for a period of time, and then slowly cooled with the furnace. During the cooling process, the austenite is transformed again, which can make the steel structure fine .

2. Spheroidizing annealing. Used to reduce the high hardness of tool steel and bearing steel after forging. The workpiece is heated to a temperature between 20 and 40 ° C above the temperature at which the steel begins to form austenite, and is slowly cooled after the heat preservation. During the cooling process, the lamellar cementite in pearlite becomes spherical, thereby reducing the hardness.

3. Isothermal annealing. Used to reduce the high hardness of some alloy structural steels with higher nickel and chromium content for cutting. Generally, it is first cooled to the most unstable temperature of austenite at a relatively rapid rate, and after holding for an appropriate time, the austenite is transformed into toustenite or sorbite, and the hardness can be reduced.

4. Recrystallization annealing. It is used to eliminate the hardening phenomenon (increased hardness and decreased plasticity) of metal wires and sheets during cold drawing and cold rolling. The heating temperature is generally 50 to 150 ° C below the temperature at which the steel begins to form austenite. Only in this way can the work hardening effect be softened.

5. Graphitizing annealing. Used to make cast iron containing a large amount of cementite into malleable cast iron with good plasticity. The technical operation is to heat the casting to about 950 ° C, and then cool it properly after holding for a certain period of time to decompose the cementite to form flocculent graphite.

6. Diffusion annealing. Used to homogenize the chemical composition of alloy castings and improve their performance. The method is to heat the casting to the highest possible temperature without melting, and keep it warm for a long time, and then slowly cool after the various elements in the alloy tend to be uniformly distributed.

7. Stress relief annealing. Used to eliminate the internal stress of steel castings and weldments.

For more information, please feel free to follow our website, thank you for your support.



New service from OilVoice
Trip Shepherd is for companies who need to track their staff in areas of risk.
It's free to use, so we invite you to try it.

Visit source site

https://permanentsteel.com/newsshow/annealing-proc...

Seamless steel pipecarbon steelannealing process

More items from lvy


How to Maintain Oil Casing Pipe

At present, many oil companies are protecting oil casing pipe , and do not allow the use of wear-resistant belts. So how to repair the casing problem? Many drilling companies have tried many methods to remove the toughness of the tungsten carbide of the drill pipe. In the welding process of the wea ...

lvy lee - Permanent Steel Manufacturing Co.,Ltd


Posted 9 days agoPress > casing pipeOil and GasMaintain

Types of Oil Casing and Their Respective Uses

According to the function of casing pipe , it can be divided into surface casing, technical casing and oil casing. 1) Surface casing of petroleum casing: 1. It is used to block the unstable and soft, easily collapsed and leaking stratum and water layer in the upper part; 2. Install a wellhead devic ...

lvy lee - Permanent Steel Manufacturing Co.,Ltd


Posted 9 days agoPress > casing pipecasing typecasing uses

The Technological Development Process of ERW Steel Pipes at Home and Abroad

High frequency straight seam welded pipe (ERW) is the hot rolled coil plate formed by the forming machine, using the skin effect and proximity effect of high frequency current to heat and melt the edge of the tube blank, and pressure welding under the action of the squeeze roller To achieve product ...

lvy lee - Permanent Steel Manufacturing Co.,Ltd


Posted 16 days agoPress > erw steel pipeTechnological DevelopmentHome and Abroad +1

Corrosion Mechanism and Anti-corrosion Process of Oil Well Casing

The damage to the wellbore structure of oil fields and water wells not only affects the normal production of damaged wells, but also affects the normal development of adjacent wells and even blocks, and poses a great threat to the stable production of the entire oil field. The main factors that caus ...

lvy lee - Permanent Steel Manufacturing Co.,Ltd


Posted 16 days agoPress > well casingAnti-corrosion ProcessCorrosion Mechanism +1

Anti-corrosion Process of Oil Casing Pipe

Corrosion of oil casing is related to factors such as partial pressure of corrosive gas, ambient temperature, water content, salinity, flow rate, pH value and so on. So what are the anti-corrosion processes of the oil  casing pipe ? Let 's take a brief look: 1. Cement sealing anticorrosion skills I ...

lvy lee - Permanent Steel Manufacturing Co.,Ltd


Posted 19 days agoPress > casing pipeAnti-corrosion Processmining industry
All posts from lvy