Press

Specification and Requirements for Seamless Steel Pipe Marking


In the relevant regulations, there are a series of regulations and requirements for seamless steel pipe marking. The specific requirements for the logo are as follows:

1. The seamless steel pipe manufacturer's logo should be eye-catching, firm, clear, standardized, and not easy to fade.

2. The mark shall include at least the following contents: the name and trademark of the seamless steel pipe manufacturer, the product standard number, the grade of the steel pipe, the product specification and the traceability identification number or telephone number. For precision seamless steel tubes, you can increase the main performance indicators and dimensional precision levels.

Seamless steel pipe marking
3. The standard can be printed, stamped, scrolled, printed, pasted imprint or hang tags, tag and other methods, the supplier can hang one or more signs method.
4. Steel pipes with an outer diameter of not less than 36 mm shall be started at a distance of not less than 200 mm from the end of the seamless steel pipe, and each of the marking methods shall be carried out.
5. For low-pressure fluid seamless steel pipe and thin-walled seamless steel pipe, seamless steel pipe and other general-purpose seamless steel pipe, cross-section seamless steel pipe, complex cross-section seamless steel pipe can not be every mark.
6. Pipe joints of seamless steel pipes for petroleum, gas, 3PE anticorrosion, etc., shall have the grade mark of seamless steel pipe.
7. In the case of a container package, a bracket welding package or a thin-walled seamless steel pipe set. A label or tag should be attached to the seamless steel pipe on the outer layer of the container, bracket, and thin-walled seamless steel pipe.



New service from OilVoice
Trip Shepherd is for companies who need to track their staff in areas of risk.
It's free to use, so we invite you to try it.

Visit source site

https://permanentsteel.com/newsshow/specification-...

Seamless steel pipemarking3PE

More items from lvy


Annealing Process of Seamless Steel Pipe

Annealing process of  seamless steel pipe : 1. Fully annealed. It is used to refine the coarse and superheated structure with poor mechanical properties in medium and low carbon steels after casting, forging and welding. The workpiece is heated to a temperature between 30 and 50 ° C above the temper ...

lvy lee - Permanent Steel Manufacturing Co.,Ltd


Posted 3 days agoPress > Seamless steel pipecarbon steelannealing process

API Coupling for Tubing and Casing Pipe

The  casing pipe  coupling is a kind of oilfield drilling tool, which is mainly used for the connection of the oil pipe, and mainly solves the problem that the existing coupling easily generates fatigue fracture due to stress concentration. The tubing coupling structure is: the tubing end is connec ...

lvy lee - Permanent Steel Manufacturing Co.,Ltd


Posted 10 days agoPress > couplingcasing pipetubing

Technical Requirements for Heat Preservation of Spiral Steel Pipes

After the heat insulation treatment of spiral steel pipes( SSAW steel pipe ), people are accustomed to call them heat insulation steel pipes.The insulation layer of heat insulation steel pipes is filled with rigid polyurethane foam. The quality requirements for the insulation layer of spiral steel p ...

lvy lee - Permanent Steel Manufacturing Co.,Ltd


Posted 11 days agoPress > spiral steel pipessaw steel pipeheat preservation +1

Oil Casing Pipe Tempering Process and Category

The tempering process of the  casing pipe  is a heat treatment process of reheating the quenched workpiece to a suitable temperature lower than the lower critical temperature, and cooling to room temperature in a medium such as air or water or oil after a certain period of time. The purpose of temp ...

lvy lee - Permanent Steel Manufacturing Co.,Ltd


Posted 16 days agoPress > casing pipeTempering ProcessCategory

What are the Detection Methods of Oil Casing Pipes?

What are the detection methods for casing pipes ? Let's take a brief look: 1. Ultrasonic testing. When ultrasonic waves are scattered in the tested raw materials, the acoustic properties of the raw materials and the transformation of the internal structure have a positive impact on the disseminat ...

lvy lee - Permanent Steel Manufacturing Co.,Ltd


Posted 23 days agoPress > casing pipeN80 oil casingDetection Methods
All posts from lvy