Press

Probe Solves Industry Challenges by Innovating & Improving Logging Technologies

Posted by Sharon Roe

15-Nov-2019

probe1.com


New cost-effective solutions provide increased reliability, faster sampling rates and more accurate data
 
FORT WORTH, Texas – November 15, 2019 – Probe Technologies Holdings, Inc (“Probe”), a leading supplier of cased-hole logging and advanced monitoring technology to the global oil and gas and geothermal industries, continues to innovate new developments that improve logging reliability and data quality, both critical to return on investment.
 
During the past six months, the company has introduced new patented sensors and tools that dramatically improve data logging efficiency and accuracy.   

“We are absolutely driven by market demand for faster, more cost-effective solutions to log accurate data, so we set out to deliver that by innovating traditional logging technologies,” said Federico Casavantes, CEO of Probe. “For example, our new ProMAC™ Series of multi-arm caliper tools are fully combinable with all Probe HD Platform tools, and operate in Surface Readout or Memory modes. There are multiple improvements that increase reliability, maintainability and accuracy. One such improvement, for example, is that the tool's sensors' outstanding linearity and stability has allowed us to reduce calibration time to half a day. Consequently, our customers are able to increase asset utilization by minimizing downtime. It also means that electronics and sensors aren't exposed to high temperatures more than absolutely necessary, reducing the risk of tool failure due to temperature fatigue.” 

MAC24:  New Technology Showcase 2019 Winner
Just last month, the MAC24™, which is the first in the ProMAC Series, was selected as a winner in the New Technology Showcase at LAGCOE 2019 in Louisiana.  The new MAC24 incorporates innovations in metrology and manufacturing, greatly improving log data quality, accuracy and reliability when logging tubing and casing mineral deposition, corrosion, wear and mechanical deformation.  Relying upon a modular constant current sensor design that Probe developed specifically for the ProMAC Series, the tool provides high-stability and accuracy over its full operating temperature range up to 175°C. 
 
The MAC24 calibration process has also been dramatically reduced from days to a few hours.  
 
Designed with the utmost attention to measurement quality, the tool has been proven through extensive engineering and field-testing. At recommended logging speeds of 30 ft per minute (9 meters per minute), MAC24 meets industry standards with a vertical resolution of 0.12” (3mm). Considering future super high-resolution requirements, the tool will also be capable of sampling at up to 100 frames per second achieving a vertical resolution of 0.06” (1.5mm) at current industry-accepted logging speeds.
 
First XY caliper for geothermal well operations
In September, Probe introduced the UHT Dimension™ XY Caliper, the first XY Caliper Tool designed to operate in ultra-high temperature environments.  The tool, which builds upon the Kuster® geothermal logging tool portfolio, performs in hostile environments up to 325°C (617°F) and provides two continuous independent perpendicular measurements (X and Y) of the internal diameter of the casing.  It also generates a high-resolution temperature profile of the well via an external fast-response resistance temperature detector (RTD).  It is the first caliper tool available to log in ultra-high temperature environments, such as those typically encountered in geothermal well operations.
 
Assessing well conditions increases efficiency of costly plug & abandonment operations
In other development news, Probe is hard at work on its Multi-String Isolation Logging (MSIL) tool, which offers a unique and cost-effective solution for assessing the isolation behind casing without pulling production tubing from the well.  The aim is to provide operators with a ground-breaking technology to evaluate and determine cement bond quality and isolation without pulling the completion, thus greatly increasing the efficiencies and lowering the cost of plug and abandonment operations. By collaborating with a major operator, the tool is progressing on schedule, and has performed successfully in rigorous field trials in the North Sea. Probe plans to continue to collaborate further during 2020 with E&P operators in an extended field trial phase in order to fully prove the technology before going to market.
 
ENDS 

About Probe
Established in 1994, Probe is widely acknowledged as a leading supplier of specialized cased hole logging and advanced monitoring solutions to the global oil and gas industry.  Headquartered in Fort Worth, Texas, the Company operates globally through its expanding footprint of technology and support centers in North America, Latin America, Europe, the Middle East, North Africa and Asia, as well as a wide network of trusted representatives.  For more information on Probe and its product portfolio, visit www.probe1.com. 

For further information, contact:

Justin Galloway, Marketing Communications Coordinator, Probe, Fort Worth, Texas USA
Office:   +1 817 568 8528 x1212, Email: Justin.galloway@probe1.com  www.probe1.com



New service from OilVoice
Trip Shepherd is for companies who need to track their staff in areas of risk.
It's free to use, so we invite you to try it.

Visit source site

probe1.com

cased-hole loggingProbe1monitoring technologyOil and GasWell IntegrityProbe Technology HoldingsMAC24ProMAC

More items from roesharon


ONSHORE DRILLING CAMPAIGN IN MEXICO COMPLETED BY SIMMONS EDECO

ONSHORE DRILLING CAMPAIGN IN MEXICO  COMPLETED BY SIMMONS EDECO Operation Carried Out on  Panuco  Field CALGARY, Canada – April 30, 2020 –  SIMMONS EDECO, a leading supplier of onshore drilling and workover services to the global oil and gas industry, today announced that it has successfu ...

Sharon Roe


Posted 19 days agoPress

IFR Forms Strategic Alliance with Oilfield Service Leader SIMMONS EDECO

Calgary, Alberta -- January 31, 2020 -- International Frontier Resources Corporation ("IFR" or the "Company") (TSX-V: IFR) (OTCQB: IFRTF), today announced it has signed a two year Cooperation Agreement with leading oilfield service provider SIMMONS EDECO  ("SIMMONS").  Through this strategic al ...

Sharon Roe


Posted 3 months agoPress > MexicoIFRInternationalFrontierResources +11

SIMMONS EDECO LANDS DRILLING CONTRACT IN MEXICO

Recent Award Signals Continued Growth in Latin America CALGARY, Canada – January 10, 2020 – SIMMONS EDECO, a leading supplier of onshore drilling and workover services to the global oil and gas industry, today announced that it has been awarded an additional drilling contract in Mexico; as th ...

Sharon Roe


Posted 4 months agoPress > Mexicoonshoredrillingonshoredrillingmexico +6

SIMMONS EDECO COMPLETES DRILLING CAMPAIGN IN MEXICO 

Working with Local Communities & Maintaining Highest Operating Standards Keys to Success CALGARY, Canada – October 9, 2019  – SIMMONS EDECO, a leading supplier of onshore drilling and workover services to the global oil and gas industry, today announced that it has completed an onshore drillin ...

Sharon Roe


Posted 7 months agoPress

CIS COMPLETES PILE-DRIVING OPERATION TO CONSTRUCT PHOSPHATE EXPORT TERMINAL IN JORDAN

Pile-driving specialist gears up in  nearshore marine construction industry CIS , an Acteon company that installs conductors and piles for the oil and gas and nearshore marine construction industries, announced that it has completed a major pile-driving operation in conjunction with constructi ...

Sharon Roe


Posted 8 months agoPress
All posts from roesharon