Press

Gas Hose for a Variety of Applications

Posted by Michaela Reay

13-Nov-2019

huntingdonfusion.com


It is important when transporting inert gas supply to the welding zone that the hose is of high quality, ensuring the gas arrives without contamination.

Tailor made Inert Gas Feed Hoses are available from Huntingdon Fusion Techniques HFT® with leak tight fittings. Luke Keane, Technical Sales Manager for HFT® said: “Our range of gas hoses are available for transporting gas at both high and low pressure. Using a high quality gas welding hose will ensure a leak tight method of feeding non-contaminated gas into the welding zone for weld purging.

“All of our products are made to the highest quality and standard and are the best available for argon, helium and other gas use.”

The special low outgassing rate rubber feed hose comes complete with a regulator, which directly connects to any range of Inflatable Tube and Pipe Weld Purging Systems at one end and to the gas source at the other. Regulators can be changed or eliminated.

Conforming to British Standard BS EWN 599 Quality Standard, the Inert Gas Feed Hoses each have a temperature range from -30º up to 80ºC and a safety factor of three times working pressure 20 bar (300 psi). 

A selection of leak tight adaptors is provided for attaching the inert gas regulator whilst the pre-fitted other end joins up with all HFT® Argweld® Pipe Weld Purging Systems. All of these high quality fittings will eliminate welding connection difficulties that welders might experience on site. 

The Inert Gas Feed Hoses can also be supplied to all other TIG / GTAW welders as well as laser operators with their own special fittings as required. The hoses are available off the shelf in a standard range of lengths, 30 m, 25 m, 20 m, 15 m, 10 m and 5 m, with special made hoses made to order.

In the event of operators working in high temperature conditions as for heat-treated chrome steel pipework for example, special high temperature resistant hoses are available, complete with special heat resistant fittings.

HFT® advises welders and laser operators to only use top quality hose assemblies to feed inert gas for top quality welds!



New service from OilVoice
Trip Shepherd is for companies who need to track their staff in areas of risk.
It's free to use, so we invite you to try it.

Visit source site

huntingdonfusion.com

huntingdon fusionargon gas hosegas hoseweld purging

More items from michaelareay


Low Cost Pipe Stopping when access is tight

Pipe stopping where access is tight can pose challenges for when duties such as repair work, leak testing and weld purging are required. Pipestoppers®, a Division of Huntingdon Fusion Techniques HFT® design and manufacture a Range of Mechanical and Inflatable Pipestoppers® and Plugs to suit a vari ...

Michaela Reay


Posted 7 days agoPress > low profile stopperspipe stopperpipe blocking +2

QuickPurge® for Weld Purging Large Diameter Pipework

Weld Purging large diameter pipework made from stainless, duplex and chrome steels, titanium or zirconium can be expensive, with requirements to have the oxygen level well below 100 ppm during the welding cycle.  As it is not cost effective to completely fill pipework with expensive inert gas, Hun ...

Michaela Reay


Posted 15 days agoPress > quickpurgeweld purginghuntingdon fusion +2

Protect your weld with the New Design Weld Trailing Shield®

Protecting titanium and stainless steel welds from coming into contact with air whilst they cool prevents oxidation, weld defects and rework. Leaders in Weld Purging Technology, Huntingdon Fusion Techniques HFT® have launched their re-designed Weld Trailing Shields®, which provide an additional in ...

Michaela Reay


Posted 21 days agoPress > argweldtrailing shieldinert gas shield +2

Pipe Maintenance with Pipe Freezing

Companies currently facing system downtime can drastically reduce pipe and valve repair and maintenance costs with Accu-Freeze™ available from the Pipestoppers® Division of Huntingdon Fusion Techniques HFT®. Georgia Gascoyne, CEO for HFT® said: “Pipe freezing is a simple and efficient way of seali ...

Michaela Reay


Posted 26 days agoPress > pipe freezingaccu freezeqwik freezer +1

Inflatable Pipe Stoppers for Sealing, Blocking and Testing

Single Ended Inflatable Dams are readily available in a variety of shapes and sizes for a range of applications including sealing, blocking, pressure testing and isolation. Pipe stopping equipment from the Pipestoppers® Division from Huntingdon Fusion Techniques HFT® gives the user the opportunity ...

Michaela Reay


Posted 1 month agoPress > inflatable pipe stopperssingle ended stoppershuntingdon fusion +2
All posts from michaelareay