Press

Flexible Welding Enclosure® for Welding Titanium and Nickel Alloy

Posted by Michaela Reay

05-Apr-2017

huntingdonfusion.com


When welding titanium or nickel alloy parts, it is important that the welding zone is purged of oxygen to a level as low as 10 parts per million (ppm).

Flexible Welding Enclosures® are available for a fraction of the cost of a rigid welding chamber, providing a technically viable option to the very expensive rigid metal chambers. Size for size, these Enclosures cost considerably less than a metal glove box or a vacuum system, with a very fast purging time down to a few ppm of oxygen. The Welding Enclosures are ideal for small production quantities of items that need total gas coverage as well as single large items with critical joints.

A combination of translucent material and optically clear sheet is used depending on the viewing requirements of the customer. Large access zips are fitted to each Enclosure and additional entry points can be provided for operators' gloves. A service panel incorporates access ports for welding torches, electrical leads and water-cooling supplies and a purge gas entry port and exhaust valve are also manufactured as standard to vent displaced gas into the atmosphere.

Flexible Welding Enclosures® are used by companies such as British Airways, Airbus, Pratt and Whitney, Lufthansa, Senior Engineering and Shapes Aerospace International along with many other companies in the Aerospace field and many other Industries such as Titanium Bicycle Manufacturing Companies.

Operator comfort and ease of use versus the disagreeable conditions found with a rigid plastic or metal chamber make the flexible versions a big hit with welding personnel. The manufacturers of these Flexible Enclosures are Huntingdon Fusion Techniques HFT® along with their technically trained Worldwide Exclusive Distributor Network.

HFT® have over 40 years experience in the weld purging field especially with respect to titanium and nickel alloys, which are widely used in the Aerospace Industry and need to be purged down to the lowest levels of moisture and oxygen when welding to ensure the maximum corrosion resistance and the minimum of defects that are caused by the presence of moisture and oxygen.

With the technical knowledge and dedicated support of HFT® and their Network of Exclusive Distributors, any company purchasing a Flexible Enclosure will be up and running in the fastest possible time.

Shapes Aerospace have quoted: “We use our Argweld® Flexible Welding Enclosure® along with the PurgEye® Weld Purge Monitor® everyday for our titanium welding. They are built to last!"

Ron Sewell, Chairman for Huntingdon Fusion Techniques HFT® said: “There are many requirements for welding zones to be purged of oxygen down to as low as 10 ppm, which can be a problem when companies see the high costs of traditional metal chambers. Our Flexible Welding Enclosures® are an ideal solution.”

Huntingdon Fusion Techniques HFT® has spearheaded a drive to design systems specifically for the Welding Industry. The company has been at the forefront in developing these Enclosures for many years and has exploited the opportunities offered by advanced engineering polymers.

Special Flexible Welding Enclosures® can be designed and manufactured to suit any purpose. HFT® has recently manufactured systems for complete robot manufacturing cells and for laser additive manufacturing applications.

Huntingdon Fusion Techniques HFT® have a Worldwide Exclusive Distributor network, which can be found at www.huntingdonfusion.com.

Flexible Welding Enclosures® video is available at: https://www.youtube.com/watch?v=ZlYO0PYTTro


Visit source site

huntingdonfusion.com

welding chamberwelding enclosureflexible welding enclosurehuntingdon fusionweld purging

More items from michaelareay


Low Cost Weld Purge Monitor for Welding Titanium

Weld Purging Techniques are now used in most industries especially when welding reactive metals. Whilst the welding torch provides a protective cover to the top of the fusion zone, inert gas coverage is also required at the weld root.  By sampling the gas and testing the oxygen content around the ...

Michaela Reay


Posted 5 days agoPress > purgeye nanoweld purgingback purging +3

No Burst Pipe Purging Systems with PurgeGate

Pipe welders are now turning more and more to Inflatable Pipe Purging Systems because of their easy use to complete a weld faster and with less risk of oxidation, to save money from the speed and the avoidance of reject or cut outs. These unique systems restrict weld purging zones, saving time wai ...

Michaela Reay


Posted 10 days agoPress > purgegatehuntingdonhuntingdon fusion +2

High Quality Feed Hose for Inert Gas Supply

Using a high quality gas welding hose will ensure a leak tight method of feeding non-contaminated gas into the welding zone for weld purging. Continuing their pursuit to advance in Weld Purging Technology, Huntingdon Fusion Techniques HFT® now manufacture tailor made Inert Gas Feed Hose assemblies ...

Michaela Reay


Posted 19 days agoPress > weld purgingargon feed hoseinert gas feed hose +2

Portable 10 ppm Weld Purge Monitor

With ever-improving standards in Quality Control, measuring the oxygen level around welds before, during and after welding reactive metals is crucial.  The hand held PurgEye® 200 is a Weld Purging Monitor® specifically developed and designed for use when welding titanium, zirconium, high specifica ...

Michaela Reay


Posted 1 month agoPress > weld purgingweld purge monitorpurgeye +2

Weld Purging: Replace Foam with Film for High Quality Welds

The use of home made sponge foam purge dams for pipe weld purging is still very familiar throughout the welding industry. However, operators are unaware as to how the use of sponge foam can adversely influence the metallurgical strength of a joint. When sponge foam starts to warm up from the heat ...

Michaela Reay


Posted 1 month agoPress > weld purgingweld purge filmhuntingdon +3
All posts from michaelareay