Press

High Quality Feed Hose for Inert Gas Supply

Posted by Michaela Reay

01-May-2019

huntingdonfusion.com


Using a high quality gas welding hose will ensure a leak tight method of feeding non-contaminated gas into the welding zone for weld purging.

Continuing their pursuit to advance in Weld Purging Technology, Huntingdon Fusion Techniques HFT® now manufacture tailor made Inert Gas Feed Hose assemblies with leak tight fittings and a low outgassing rate.

Luke Keane, Technical Sales Manager for HFT® said: “It is important when welding all reactive metals that the welding zone is purged of oxygen, even down to as low as 20 parts per million (ppm). Our Inert Gas Feed Hose assemblies are the best way of transporting argon, helium and other inert gasses to the welding zone where a guaranteed leak tight, non contaminated delivery is required.”

“All of our products are made to the highest quality and standard and are the best available for argon and helium gas use.”

The special low outgassing rate rubber feed hose comes complete with a regulator, which directly connects to any range of Inflatable Tube and Pipe Weld Purging Systems at one end and to the gas source at the other. Regulators can be changed or eliminated. 

A selection of leak tight adaptors is provided for attaching the inert gas regulator whilst the pre-fitted other end joins up with all HFT® Argweld® Pipe Weld Purging Systems. All of these high quality fittings will eliminate welding connection difficulties that welders might experience on site.

The Inert Gas Feed Hoses can also be supplied to all other TIG / GTAW welders as well as laser operators with their own special fittings as required. The hoses are available off the shelf in a standard range of lengths, 30 m, 25 m, 20 m, 15 m, 10 m and 5 m, with special made hoses made to order.

Conforming to British Standard BS EWN 599 Quality Standard, the Inert Gas Feed Hoses each have a temperature range from -30º up to 80ºC and a safety factor of three times working pressure 20 bar (300 psi).

In the event of operators working in high temperature conditions as for heat-treated chrome steel pipework for example, special high temperature resistant hoses are available, complete with special heat resistant fittings. 

HFT® advises welders and laser operators to only use top quality hose assemblies to feed inert gas for top quality welds!

Huntingdon Fusion Techniques HFT® has a worldwide Exclusive Distributor Network. For your nearest Exclusive Distributor, please visit:

https://www.huntingdonfusion.com/index.php/en_gb/contact/worldwide-offices



New service from OilVoice
Trip Shepherd is for companies who need to track their staff in areas of risk.
It's free to use, so we invite you to try it.

Visit source site

huntingdonfusion.com

weld purgingargon feed hoseinert gas feed hosehuntingdonhuntingdon fusion

More items from michaelareay


Liquid Nitrogen Pipe Freezing

Pipe freezing is a simple and efficient way of sealing a pipe or system while pipe repairs or general pipework maintenance is carried out, without the need to drain the system. Accu-Freeze™ Pipe Freezing Systems are available from the Pipestoppers® Division of Huntingdon Fusion Techniques HFT®. A ...

Michaela Reay


Posted 4 days agoPress > pipe freezingpipe repairshuntingdon fusion +2

Flow Stopping Solutions for all Applications

Flow and line stopping equipment gives the user the opportunity to isolate a section of pipeline to carry out repair and maintenance work. The Pipestoppers® Division from Huntingdon Fusion Techniques HFT® design and manufacture a Range of standard and non-standard Inflatable Stoppers for tanks, ch ...

Michaela Reay


Posted 11 days agoPress > flow stoppingline stoppingpipe stopping +2

Monitor your Titanium Welds for High Quality Results

Preventing oxidation when welding tubes and pipes can be achieved by purging the inside with an inert gas. This simple procedure saves both time and cost. By knowing the exact level of oxygen inside the pipe at all times, the welder knows when to start welding for high quality results. With restri ...

Michaela Reay


Posted 18 days agoPress > purgeyehuntingdon fusionHFT +1

Argon Regulator for Pipe Purging Systems

Dramatic savings can be achieved when welding stainless and chromium steels and also titanium alloy tube and pipes with the use of an Inflatable Pipe Purging System. By restricting weld purging zones, Inflatable Pipe Purging Systems achieve a huge saving in time waiting for pipes to be completely ...

Michaela Reay


Posted 23 days agoPress > huntingdon fusionHFTpipe purging +2

Gas Hose for a Variety of Applications

It is important when transporting inert gas supply to the welding zone that the hose is of high quality, ensuring the gas arrives without contamination. Tailor made Inert Gas Feed Hoses are available from Huntingdon Fusion Techniques HFT® with leak tight fittings. Luke Keane, Technical Sales Manag ...

Michaela Reay


Posted 1 month agoPress > huntingdon fusionargon gas hosegas hose +1
All posts from michaelareay