Detection of Heterogeneous Atoms in Thermally Expanded Steel Tubes

Posted by Joy Huang


Detection of Heterogeneous Atoms in Thermally Expanded Steel Tubes

Due to the roll strengthening mechanism, increasing the strength of the metal allows the metal to form a solid alloy with another metal (or non-metal). Solid solution alloys or alloys based on solid solution (such as carbon steel) generally have higher strength than pure metals. This phenomenon of adding a solute element to increase the strength of a solid solution is called solid solution strengthening. The thermal expansion of the steel tube is therefore based on the chemical composition of Jincheng (the microstructure of the ferrite in the lattice does not change), and the enhanced metallurgical basis is due to the dislocation and heterogeneity of the movement. The result of interaction between atoms.

For non-alloyed and low-alloy steels, solid solution strengthening can be considered as a strengthening mechanism, independent of the rolling system. The most important alloying elements in steel, Mn.Ni, Cu and P, can form a replacement solid solution and promote a linear increase in yield strength and resistance. The degree of rise of the line can be determined by the coefficient Ac. The strength increase value Ac is a concentration change value of the alloying element. In addition to the replacement elements, the C, N and other elements form a gap in Fe. The solubility of the solid solution in iron is very low (the maximum dissolution of N when the temperature is 585X: the solubility of C when the temperature is 721T: 0.018%) ), and it drops greatly with temperature. Therefore, C and N have little effect on the yield strength and tensile strength in the solid solution content.

Visit source site

steel pipeSeamless carbon steel pipe

More items from joy

Application Of Seamless Steel Pipe In Construction Pipeline Industry

Among the many pipe materials, the most practical one is the seamless steel pipe . This is a more powerful pipe material, not only because of the wide range of fields and scope of the pipe material, but more importantly, Because the quality of seamless steel pipe is very good, the quality of seamle ...

Joy Huang

Posted 2 months agoPress > steel pipepipelineSeamless carbon steel pipe

Sizing Technology Of Steel Pipe Plant

When the steel pipe is sized by the micro-tension reducer of the steel pipe plant, the steel pipe wall is unevenly thickened due to the lateral deformation of the metal (flowing in the radial direction), and the inner hole of the cross-section is "six square", commonly known as "inside" Six parties. ...

Joy Huang

Posted 2 months agoPress > steel pipe

Stainless Steel Seamless Pipe Is Different From Seamed Tube

The stainless steel seamless pipe is manufactured by punching a hole in a stainless steel billet at a temperature of 2,200 °F. At this high temperature, the tool steel is softened and spirally formed from the hole by punching and drawing. In this way, the wall thickness of the pipe is uneven and t ...

Joy Huang

Posted 2 months agoPress > Seamless steel pipestainless steel pipe

Development and Application of Large Longitudinal Welded Pipes

With the development of oil weather, it has gradually developed to remote areas, oceans, and cold regions. The reliability of steel pipes for oil and gas pipelines has been increasingly demanded, requiring high-strength large-diameter and thick-walled pipeline steel pipes. As the requirements for oi ...

Joy Huang

Posted 8 months agoPress > Seamless steel pipelsaw steel pipe

Adjustment Of The Position Of High-Frequency Induction Coil Of Straight Seam Steel Pipe

The excitation frequency of the high-frequency straight seam welded pipe is inversely proportional to the square root of the capacitor and the inductance in the excitation loop, or proportional to the square root of the voltage and current. As long as the capacitance, inductance or voltage and cur ...

Joy Huang

Posted 9 months agoPress > lsaw steel pipeerw steel pipe
All posts from joy