Press

Heavy-duty Flow and Line Stopping with Steel Plugs

Posted by Michaela Reay

28-Feb-2019

huntingdonfusion.com


There are occasions where pipes need to be repaired whilst liquids are still flowing.

Heavy-duty flow stopping and line plugging may require plugs and stoppers to have long immersion in chemicals or exposure to high temperatures, which many such items are not capable of withstanding.

Providing the user with the opportunity to isolate a section of pipeline whilst essential repair work can be carried out, the Pipestoppers® Division manufacture a range of single Steel Plugs, which are ideal for more arduous duties and also available as double versions for even tougher applications involving higher pressures.

Luke Keane for HFT® said: “Our line stopping products are regarded as one of the most effective and cost saving methods of pipe isolation. Often, stopping the flow in a heavy-duty operation can be difficult. Our range of Steel Plugs is specifically designed for heavier duty applications such as long immersion in water, for use at higher temperatures or for contact with acidic or alkaline environments for which other Plugs are not suitable." 

“The Steel Plugs can be used for low pressure testing as well as plugging pipes, pipelines and pipework fabrications and other orifices between 2 and 48” (50 to 1,200 mm) diameter.”

The HFT® single and double Steel Plugs are available with sealing rings made from viton, silicon, neoprene, nitrile or natural rubbers for resistance to different temperatures and chemicals.


Visit source site

huntingdonfusion.com

flow stoppingline stoppingline pluggingpipe stoppinghuntingdon fusion

More items from michaelareay


New: Unique 10 ppm Colour Touch Screen Weld Purge Monitor®

It is essential to monitor the oxygen level when welding reactive metals. Metals that are classed as ‘reactive' (titanium, zirconium and nickel alloys) are sensitive to oxygen when heated. When welding these metals, the oxygen must be purged from the welding zone, down to as low as 10 parts per mil ...

Michaela Reay


Posted 14 days agoPress > purgeyeweld purge monitorweld purging +2

Improve Tungsten Electrode and Welding Arc Performance with the TEG-1000

Tungsten Electrode Grinders are essential with TIG/GTA welding. Using a Grinder that has been designed and manufactured specifically for tungsten metal is not only a much safer option, they provide more accurate results leading to as many as ten times greater number of arc strikes and giving very d ...

Michaela Reay


Posted 27 days agoPress > tig weldingteg1000thoriated tungsten electrodes +3

Weld Purging Post Weld Heat Treated (PWHT) Pipework

Welding processes can weaken metals by imparting residual stresses into a material, leading to a reduction in corrosion resistance properties. Post Weld Heat Treatment (PWHT) is regularly used to retain the strength of a metal when welding certain materials including high strength stainless steel a ...

Michaela Reay


Posted 1 month agoPress > weld purgingpwht pipeworkhotpurge +1

Weld Purging: Replace Paper, Foam and other unsuitable Materials with Argweld® Weld Purge Dams

Weld Purging is essential when welding tubes and pipes made of reactive metals such as stainless steels, titanium and zirconium. Usually weld zones are confined with purge dams so that the use of argon purge gas is limited and waiting times are reduced. Homemade dams fabricated from paper, sponge ...

Michaela Reay


Posted 1 month agoPress > huntingdonhuntingdon fusionHFT +2

Oxidation Free Weld Beads with Weld Backing Tape™

Welders are often faced with challenges where high quality stainless steel, duplex and chrome steel welds are required, but where the use of purge gas is not always possible. One solution to this problem is the use of Argweld® Weld Backing Tape™ from Huntingdon Fusion Techniques HFT®. This high te ...

Michaela Reay


Posted 1 month agoPress > huntingdon fusionweld backing tapebacking tape +2
All posts from michaelareay