Press

Weld Purge your Heat Treated Pipes Confidently with HotPurge®

Posted by Michaela Reay

07-Mar-2017

huntingdonfusion.com


High strength steel joints must pre-heated prior to welding and also require a post-weld heat treatment. Weld joints of this nature are often purged of oxygen and welded in an inert atmosphere to reduce the risk of ‘sugaring', an imperfection that could allow metal pieces to break off inside pipework and cause damage to turbines, for example.

With the high temperatures and length of time at such temperatures, most weld purging systems are unsuitable. HotPurge® has been developed by International Weld Purging Specialists Huntingdon Fusion Techniques HFT®, an Inflatable Pipe Purging System for Heat Treated Chrome and High Strength Stainless Steel Pipe Joints where the temperatures might be as high as 760ºC (1,400ºF) for many hours.

Luke Keane, Distributor Support for HFT® said: “HotPurge® allows the purge to be safely continued for up to 24 hours whilst pre-heating, welding and post weld heat-treating with the purge system remaining in place.”

“Along with our other ranges of Inflatable Pipe Purging Systems, the HotPurge® Systems are manufactured in the UK, with scientific knowledge and research invested in each of our products. We do not sacrifice quality! You can be sure to achieve perfect welds, time and time again.” 

HotPurge® includes PurgeGate®, a revolutionary device to prevent over inflation of, and damage to the inflatable dams. No matter how high the user increases the pressure, in order to deliver more gas flow, PurgeGate® prevents too much pressure being delivered to the inflatable dams, allowing an increased flow, to achieve a lower oxygen level or faster cooling of the weld zone.

HotPurge® ensures the purge space remains tightly sealed at all times as the inflatable dams maintain an even seal throughout the weld cycle, irrespective of pressure rises or excessive flow rates of argon gas. The large central collar dramatically reduces the space to be purged and makes it easier to reach lower oxygen levels faster than with conventional purging systems.

Each HotPurge® System incorporates an innovative central band for easy positioning inside the pipe. This band, known as RootGlo®, will illuminate inside the dark pipe, for up to 20 hours, with only 10 minutes previous exposure to daylight.

HotPurge® Systems are manufactured to suit pipe diameters from 6 to 96” (150 to 2,440 mm) and both inflatable dams have pull handles securely sewn with high temperature resistant Kevlar thread that will withstand a pulling force of 1,000 lb. 

These HotPurge® Inflatable Pipe Purging Systems can be used repeatedly for weld purging and will keep the oxygen levels below 100 parts per million (ppm) throughout the welding cycle, ensuring oxide and coke free welds, without the metallurgical imperfections caused by exposure to too much oxygen.

Huntingdon Fusion Techniques HFT® have a Worldwide Exclusive Distributor network, which can be found at www.huntingdonfusion.com.



New service from OilVoice
Trip Shepherd is for companies who need to track their staff in areas of risk.
It's free to use, so we invite you to try it.

Visit source site

huntingdonfusion.com

weld purgingback purgingpurge weldinghotpurgetube and pipe weldingweldingpipe welding

More items from michaelareay


Weld Purging CMV Steels

CMV Steels (chromium / molybdenum / vanadium) are widely used for their high temperature creep properties especially in the steam turbine industries. Both pre and post weld heat treatment is necessary to achieve the optimum mechanical strength, but temperatures up to 300ºC (572ºF) must be maintain ...

Michaela Reay


Posted 1 day agoPress > hotpurgepipe purgingwelding cmv steels +2

Low Cost Weld Purge Dams

Weld Purging short pipe pieces and dome-end welds where tandem Inflatable Tube and Pipe Purging Systems are unsuitable, Huntingdon Fusion Techniques HFT® manufactures Weld Purge Dams. Ron Sewell, Chairman for HFT® said: “When welding tubes and pipes, the most cost- effective solution is to restric ...

Michaela Reay


Posted 10 days agoPress > pipe stoppingpipestoppershuntingdon fusion +1

High Temperature Weld Backing Tape®

Supporting the liquid weld root with a high temperature Backing Tape will ensure minimal oxidation and will require much less post-weld cleaning. Argweld® glass fibre Weld Backing Tape® from Huntingdon Fusion Techniques HFT® supports weld roots and eliminates the creation of slag, whilst removing co ...

Michaela Reay


Posted 17 days agoPress > backing tapeweld backing tapeback purge +1

Premium Quality Rubber Plugs

Lightweight Inflatable Rubber Plugs are available from the Pipestoppers® Division at Huntingdon Fusion Techniques HFT® for sealing, stopping and blocking pipes where oils, hydrocarbons and petrochemicals are present. Challenging pipe stopping conditions can cause major inconveniences but many alte ...

Michaela Reay


Posted 23 days agoPress > rubber plugspipe stopperspipe stopping +1

Monitor Your Weld Purge at a Distance

When welding long pipelines, one problem operators often face is not receiving a fast and true weld purge reading from the weld zone. Huntingdon Fusion Techniques HFT® make it possible to have an immediate reading of the weld purge gas from any distance up to 1,000 metres away with the PurgEye® 10 ...

Michaela Reay


Posted 25 days agoPress > huntingdon fusionpurgeyeweld purge monitor
All posts from michaelareay