Press

Welding Titanium with the Low Cost ‘Nano’

Posted by Michaela Reay

12-Dec-2018

huntingdonfusion.com


Metals that are classed as ‘reactive' (titanium, zirconium and nickel alloys) are sensitive to oxygen when heated. When welding these metals, the oxygen must be purged from the welding zone, down to as low as 10 parts per million (ppm). Weld Purging in this environment will avoid discolouration of the weld and heat affected zone and limit oxidation that could lead to a loss of metals' corrosion resistant properties. 

Welding in an atmosphere of 40 ppm or less will help to guarantee the greatest weld joint strengths and the highest resistance to corrosion. Therefore monitoring the oxygen content before, during and after welding is crucial.

With restricted budgets in mind, Huntingdon Fusion Techniques HFT® have designed and developed the low cost entry level PurgEye® Nano Weld Purge Monitor®.

Ron Sewell, Chairman for HFT® said: “The PurgEye® Nano is one of HFT®'s most affordable monitors measuring accurately to 10 ppm, ensuring that such low oxygen levels can be measured where only lower budgets are available.”

The PurgEye® Nano has been developed for weld purging where data logging, alarms and machine control are not necessarily required. This top class instrument is small, lightweight and inexpensive. Developed with a unique long life sensor that has a warm up time under 60 seconds.

With leak-tight connectors for weld purge hoses, the PurgEye® Nano can be used with optional accessory hand pump and gas sampling probe. It can be used to check purge gas quality from the main source and at the exhaust end of a purging system, as well as to find air leaks in purging hose connections anywhere in a system.

HFT® has a Family Range of PurgEye® Weld Purge Monitors® for every application. The range includes hand held, battery operated monitors and mains powered monitors, which can read oxygen levels from atmospheric concentrate, right down to 1 ppm.

Ron continues: “All of Huntingdon Fusion Techniques HFT®'s Weld Purge Monitors® and Inflatable Tube, Pipe and Pipeline Weld Purging Systems as well as our inflatable welding enclosures are manufactured in the UK. We do not sacrifice on quality. We guarantee to help welders achieve zero colour welds, time and time again.”

As the major international authority on weld purging, Huntingdon Fusion Techniques HFT® provide a very comprehensive technical support system and in addition, they have a worldwide Exclusive Distributor network which can be found at www.huntingdonfusion.com.



New service from OilVoice
Trip Shepherd is for companies who need to track their staff in areas of risk.
It's free to use, so we invite you to try it.

Visit source site

huntingdonfusion.com

huntingdon fusionpurgeyeweld purgingweld purge monitor

More items from michaelareay


Liquid Nitrogen Pipe Freezing

Pipe freezing is a simple and efficient way of sealing a pipe or system while pipe repairs or general pipework maintenance is carried out, without the need to drain the system. Accu-Freeze™ Pipe Freezing Systems are available from the Pipestoppers® Division of Huntingdon Fusion Techniques HFT®. A ...

Michaela Reay


Posted 3 days agoPress > pipe freezingpipe repairshuntingdon fusion +2

Flow Stopping Solutions for all Applications

Flow and line stopping equipment gives the user the opportunity to isolate a section of pipeline to carry out repair and maintenance work. The Pipestoppers® Division from Huntingdon Fusion Techniques HFT® design and manufacture a Range of standard and non-standard Inflatable Stoppers for tanks, ch ...

Michaela Reay


Posted 10 days agoPress > flow stoppingline stoppingpipe stopping +2

Monitor your Titanium Welds for High Quality Results

Preventing oxidation when welding tubes and pipes can be achieved by purging the inside with an inert gas. This simple procedure saves both time and cost. By knowing the exact level of oxygen inside the pipe at all times, the welder knows when to start welding for high quality results. With restri ...

Michaela Reay


Posted 16 days agoPress > purgeyehuntingdon fusionHFT +1

Argon Regulator for Pipe Purging Systems

Dramatic savings can be achieved when welding stainless and chromium steels and also titanium alloy tube and pipes with the use of an Inflatable Pipe Purging System. By restricting weld purging zones, Inflatable Pipe Purging Systems achieve a huge saving in time waiting for pipes to be completely ...

Michaela Reay


Posted 22 days agoPress > huntingdon fusionHFTpipe purging +2

Gas Hose for a Variety of Applications

It is important when transporting inert gas supply to the welding zone that the hose is of high quality, ensuring the gas arrives without contamination. Tailor made Inert Gas Feed Hoses are available from Huntingdon Fusion Techniques HFT® with leak tight fittings. Luke Keane, Technical Sales Manag ...

Michaela Reay


Posted 1 month agoPress > huntingdon fusionargon gas hosegas hose +1
All posts from michaelareay