Press

Supplementary Gas Shielding with an Argweld® Weld Trailing Shield


Eliminating oxidation and discolouration when welding stainless and duplex steels as well as titanium, zirconium and nickel alloys is crucial in many industries today, because of improving quality control procedures. Welds have to be free from metallurgical defects otherwise they can potentially be rejected, often leading to a significant loss in time and resources. 

The quality of welds on tubes, pipes and flat sheet metal can be dramatically improved with the addition of a low cost Weld Trailing Shield®.

Huntingdon Fusion Techniques HFT® have designed and developed Argweld® flat and radiused Trailing Shields® which simply attach onto any TIG/GTAW, PAW/Plasma and MIG/GMAW welding torch, providing an additional inert gas coverage during welding of reactive metals where discolouration or oxidation needs to be eliminated.

Luke Keane, Technical Sales Manager for HFT® said: “The addition of a low cost Trailing Shields® ensures that the weld stays under a protective argon gas coverage, while the hot weld metal is cooling, preventing it from oxidising on contact with air. The materials mentioned above are chosen for their corrosion resistant properties in particular and if they are then allowed to oxidise during the weld cycle, expensive post welding cleaning techniques become necessary.”

“These lightweight, easy to use Trailing Shields® pay for themselves in just one weld! They are perfect for manual welders, as well as well as automatic machines by helping to cover the weld with an inert gas coverage during and after welding, producing bright, shiny, oxide free welds every time.”

The Trailing Shield® is connected to the argon gas supply, diffusing gas evenly without turbulence through the multi layers of stainless steel mesh built into the body of the shield. At each side, replaceable silicone rubber side shields provide a barrier to prevent the argon escaping sideways and remaining over the weld metal. As the welding torch is moved forward, the weld remains under an argon gas shield until the welded metal has cooled below its oxidation temperature.

Trailing Shields® are reusable, with a temperature resistance of up to 230ºC. They prevent re-work, eliminate the need for an expensive purge chamber and allow for faster welding.

For manual welding, the welder finds that with this lightweight and low cost tool, there is no difficulty in dragging it along the surface being welded. One further benefit is that it carries the welding torch at 90º to the weld.

Radiused Shields are designed to suit the exact diameter of the pipe or vessels being welded. Flat models are available for sheet and plate welding.


Visit source site

https://huntingdonfusion.com/index.php/en_gb/news/...

trailing shieldweld trailing shieldinert gas weldingwelding shieldweld purginghuntingdon fusion

More items from michaelareay


Welding Titanium with the Low Cost ‘Nano’

Metals that are classed as ‘reactive' (titanium, zirconium and nickel alloys) are sensitive to oxygen when heated. When welding these metals, the oxygen must be purged from the welding zone, down to as low as 10 parts per million (ppm). Weld Purging in this environment will avoid discolouration of ...

Michaela Reay


Posted 2 days agoPress > huntingdon fusionpurgeyeweld purging +1

Large Diameter Pipework Fabrications

Large diameter pipework can cause several challenges, especially when those pipes are manufactured from stainless, duplex and chrome steels, titanium or zirconium. When welding such reactive materials, they need to be purged of oxygen before, during and after welding. It is not cost effective to c ...

Michaela Reay


Posted 9 days agoPress > quickpurgehuntingdon fusionweld purging +2

TEG-1000 Tungsten Electrode Grinder

The Tungsten Electrode is one of the most important variables involved in TIG welding. Preparing your Tungsten Electrode correctly will help to improve arc starting, arc stability and weld quality.  Tungsten Electrode Grinders are a convenient, safer and more accurate way than other methods of gri ...

Michaela Reay


Posted 18 days agoPress > tungsten electrode grinderteg-1000multistrike +2

Weld Purge your Heat-Treated Pipes with HotPurge®

New power plants are in high demand and several hundred are expected to be built over the next decade. Chromium-molybdenum (chromoly) steel pipe such as P91 is a major construction material for the high pressure piping in these plants and there are particular techniques for welding this pipework to ...

Michaela Reay


Posted 1 month agoPress > weld purginghotpurgingwelding Chromium-molybdenum +1

Low Cost Weld Purging with Weld Purge Plugs™

Weld Purging smaller tubes and pipes of different diameters can be challenging, especially when budgets are tight. Often, Welders are left to create their own homemade purging dams out of unsuitable materials such as foam, paper or cardboard. Huntingdon Fusion Techniques HFT® have designed and dev ...

Michaela Reay


Posted 1 month agoPress > weld purgingweld purge plugshuntingdon fusion
All posts from michaelareay