Press

Heavy-Duty Pipe Plugs

Posted by Michaela Reay

05-Sep-2018

huntingdonfusion.com


Pipe stopping and blocking where there are chemicals or high temperatures present can cause many challenges in a variety of industries including Plumbing, Oil and Gas and Petrochemical. Furthermore, if those pipes have some small ovality problems it presents additional difficulties in order to achieve a good sealing.

Peripheral Sealing Plugs for heavy-duty applications such as immersion in chemicals and / or exposure to high temperatures are now available from HFT®, which has a division solely focussing on pipe blocking, stopping and sealing know as Pipestoppers®. 

The Pipestoppers® heavy-duty sealing plugs are manufactured to suit pipe ends or orifices having a 17” (432 mm) diameter, extending to 96” (2,400mm). The plugs are specifically designed for heavier duty applications such as long immersion in water, for use at higher temperatures or for contact with acidic or alkaline environments for which other pipe plugs and stoppers are not suitable.

The heavy-duty pipe plugs in this range can also be doubled up to make them seal better, provide more stability inside the pipe and be able to hold back more pressure than the single versions.

Pipestoppers® heavy-duty plugs have a number of tightening points around their circumference so that the seal can be improved locally in case of ovality in particular.

The heavy-duty plugs feature a 2” (50 mm) centre stem threaded to accept a 2” BSP screw cap when not in use for draining, pressure testing or purging etc.



New service from OilVoice
Trip Shepherd is for companies who need to track their staff in areas of risk.
It's free to use, so we invite you to try it.

Visit source site

huntingdonfusion.com

pipe stoppingpipe pluggingheavy duty pipe plugspipestoppers

More items from michaelareay


Heavy-Duty Pipe Blocking with Steel Plugs

Heavy-duty pipe blocking and stopping is easy with the Steel Plugs Range from Pipestoppers®.  Pipestoppers®, a division of Huntingdon Fusion Techniques HFT®, manufacture Steel Plugs, which have been the favoured heavy-duty plug for applications such as leak testing, pipe stopping and blocking for ...

Michaela Reay


Posted 15 days agoPress > pipe stoppingpipe pluggingsteel plugs +2

Precise Tungsten Electrodes Tips with the TEG-1000

Correctly preparing each Tungsten Electrode for welding is crucial. It is one of the most important variables in TIG / GTA welding and each Tungsten Electrode must be ground properly to improve arc starting, stability and subsequently weld quality. Manufactured with a diamond wheel, the TEG-1000 T ...

Michaela Reay


Posted 21 days agoPress > teg-1000tungsten electrodestungsten electrode grinder +1

Weld Purging CMV Steels

CMV Steels (chromium / molybdenum / vanadium) are widely used for their high temperature creep properties especially in the steam turbine industries. Both pre and post weld heat treatment is necessary to achieve the optimum mechanical strength, but temperatures up to 300ºC (572ºF) must be maintain ...

Michaela Reay


Posted 26 days agoPress > hotpurgepipe purgingwelding cmv steels +2

Low Cost Weld Purge Dams

Weld Purging short pipe pieces and dome-end welds where tandem Inflatable Tube and Pipe Purging Systems are unsuitable, Huntingdon Fusion Techniques HFT® manufactures Weld Purge Dams. Ron Sewell, Chairman for HFT® said: “When welding tubes and pipes, the most cost- effective solution is to restric ...

Michaela Reay


Posted 1 month agoPress > pipe stoppingpipestoppershuntingdon fusion +1

High Temperature Weld Backing Tape®

Supporting the liquid weld root with a high temperature Backing Tape will ensure minimal oxidation and will require much less post-weld cleaning. Argweld® glass fibre Weld Backing Tape® from Huntingdon Fusion Techniques HFT® supports weld roots and eliminates the creation of slag, whilst removing co ...

Michaela Reay


Posted 1 month agoPress > backing tapeweld backing tapeback purge +1
All posts from michaelareay